#Profibus_DP
;
; This GSD-File must be used for all UNIGATE (module and IC) with Ident-Nr.3218H 
; and Firmware V6.0 and higher.
; These Units support DPV0, DPV1 and Publisher-Support of DPV2
;
; Historie:
; =========
; V1.1 21.11.2003 La "Publisher_supp = 1" eingefügt
; V1.2 19.10.2006 La "Changed in Parameterdata"
; V1.3 19.02.2008 La "Ident_Maintenance_supp  = 1" mit "GSD_Revision = 5" neu (alternativ)
; V1.4 23.06.2009 La 64 Wort I/O --> spez. Kennungsbyte --> konsistent
; V1.5 06.02.2015 La "(konsistent)" in Modul 7 ergänzt
; V1.6 12.07.2016 La "OrderNumber" entfällt
;
;
GSD_Revision        = 3
;GSD_Revision        = 5
;Ident_Maintenance_supp  = 1
;
Vendor_Name         = "Deutschmann Automation GmbH"
Model_Name          = "UNIGATE IC - Profibus"
Revision            = "V1.4"
Ident_Number        = 0x3218
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "Revision H"
Software_Release    = "V6.0"
;
9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 15
MaxTsdr_19.2        = 15
MaxTsdr_45.45       = 15
MaxTsdr_93.75       = 15
MaxTsdr_187.5       = 15
MaxTsdr_500         = 15
MaxTsdr_1.5M        = 20
MaxTsdr_3M          = 35
MaxTsdr_6M          = 50
MaxTsdr_12M         = 95
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "VPC3+B"
Bitmap_Device	    = "DAGW"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
Publisher_supp      = 1		;data transfer to other salves possible (DPV2-publisher)
;
Modular_Station     = 1
Max_Module          = 16
Max_Input_Len       = 244
Max_Output_Len      = 244
Max_Data_Len        = 488
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 9
Max_Diag_Data_Len   = 11
;
DPV1_Slave          = 1

C1_Read_Write_supp     = 1
C1_Max_Data_Len        = 80   			;excluding function_num, slot_number, index, length
C1_Response_Timeout    = 300

Max_Initiate_PDU_Length = 52
C2_Read_Write_supp     = 1
C2_Max_Data_Len        = 80				;excluding function_num, slot_number, index, length
C2_Response_Timeout    = 300
C2_Read_Write_required = 1
C2_Max_Count_Channels  = 2
;
DPV1_Data_Types        = 0
;
Max_User_Prm_Data_Len      = 237		;depending from used Hardware (9..237)
;
PrmText=1
Text(0)="disabled"
Text(1)="enabled"
EndPrmText

ExtUserPrmData=1 "DPV1mode"
Bit(7) 0 0-1
Prm_Text_Ref=1
EndExtUserPrmData

Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00
Ext_User_Prm_Data_Ref(0)   = 1
;
; <Module-Definition-List>
Module 		    = "1 Byte Out (konsistent)" 0xA0  
1
EndModule
Module 		    = "2 Byte Out (konsistent)" 0xA1
2
EndModule
Module 		    = "4 Byte Out (konsistent)" 0xA3
3
EndModule
Module 		    = "8 Byte Out (konsistent)" 0xA7
4
EndModule
Module 		    = "16 Byte Out (konsistent)" 0xAF
5
EndModule
Module 		    = "32 Byte Out (konsistent)" 0xAF,0xAF
6
EndModule
Module 		    = "64 Byte Out (konsistent)" 0xAF,0xAF,0xAF,0xAF
7
EndModule
Module 		    = "1 Byte In (konsistent)" 0x90
8
EndModule
Module 		    = "2 Byte In (konsistent)" 0x91
9
EndModule
Module 		    = "4 Byte In (konsistent)" 0x93
10
EndModule
Module 		    = "8 Byte In (konsistent)" 0x97
11
EndModule
Module 		    = "16 Byte In (konsistent)" 0x9F
12
EndModule
Module 		    = "32 Byte In (konsistent)" 0x9F,0x9F
13
EndModule
Module 		    = "64 Byte In (konsistent)" 0x9F,0x9F,0x9F,0x9F
14
EndModule
Module 		    = "1 Byte I/O (konsistent)" 0xB0
15
EndModule
Module 		    = "2 Byte I/O (konsistent)" 0xB1
16
EndModule
Module 		    = "4 Byte I/O (konsistent)" 0xB3
17
EndModule
Module 		    = "8 Byte I/O (konsistent)" 0xB7
18
EndModule
Module 		    = "16 Byte I/O (konsistent)" 0xBF
19
EndModule
Module 		    = "32 Byte I/O (konsistent)" 0xBF,0xBF
20
EndModule
Module 		    = "64 Byte I/O (konsistent)" 0xBF,0xBF,0xBF,0xBF
21
EndModule
;